Windows cannot access you do not have permission windows 8

Then you will see a message The file came from another computer and might be blocked to help to protect the computer if the file is blocked by Windows. Thus, you can check Unblock and click OK to continue. Now, you can check whether the issue Windows cannot access the specified path Windows 10 is solved.

If you are trying to access a file via a shortcut which is on an external hard drive or a network location that it is no longer connected to your computer, Windows might not be able to access the specified device path or file.

Thus, you can check the location of the target file and see if the file is in an inaccessible location based on following instructions.

Step 1: Right-click the shortcut of the file on your computer and choose Properties from the context menu. Step 2: Under the Shortcut tab in the popup window, check the path in Target is available or not. Windows will not be able to access the specified device path or file if the files are removed, deleted, or hidden by an antivirus. In a situation like this, you can recover the data to solve this problem. In order to recover the lost data, you can take advantage of the best data recovery software — MiniTool Power Data Recovery.

It is a user-friendly program for Windows users, which can be used to recover lost data due to various reasons, such as mistaken deletion, virus attack, mistaken formatting and so on.

As a read-only software, it will not bring any damage to the original data. So if you have lost data, you can download the Trail edition to scan the lost files. Free Download. Here are the specific instructions to recover the lost data from the inaccessible folder or partition. Step 1: Download and install the best data recovery software and launch it to enter its main interface. Step 2: Next, you will see four options and choose This PC module to continue.

Then choose the partition which you have lost the file and click Scan to continue. Step 3: When the scan is finished, you can see all files are listed here in order and you can open each path to find out the file you need. Step 4: When you have checked the lost files, you can choose a destination to save the files by clicking Save button. Here, you will receive a warning message that tells you a license key is required to activate the program since you are using the Trial edition.

Thus, you can click here to get here to buy a license. Then activate the program and complete the recovery. When you have recovered lost files, you can check whether the issue Windows cannot access the specified device path or file is solved. I have successfully solved the issue Windows cannot access the specified path or file by using the method in this post. Click to tweet. When you have solved the issue when Windows cannot access the specified path Windows 10 or successfully recovered the lost files, it is recommended to back up the data so as to provide better protection.

MiniTool ShadowMaker is a user-friendly program which can provide protection for your data and computer. With its powerful features, it can back up a file, folder, disk, partition, and the operating system. Besides the backup feature, it can also provide recovery solutions when there is a need so as to help you to restore the computer or data. Thus, you can download MiniTool ShadowMaker Trial to create a backup image for the data so as to provide better protection for them when you have recovered the lost data or solved the issue Windows cannot access the specified file.

Here, we will show you how to back up the files with MiniTool ShadowMaker. Step 1: Install the program and launch it, click Keep Trail , and click Connect in This Computer to enter its main interface.

Step 2: In the main interface, go to the Backup tab and click Source module to continue. Step 3: In the popup window, choose Folder and Files to choose what you want to back up. Step 4: When returning to the main interface, you need to click Destination module to choose where you want to save the backup image. It is advised to choose an external hard drive as the destination. Before we go further, I would like to confirm the following questions: What is the operating system of your other computers?

Can other machines successfully ping the machine? Best Regards, Leon Please remember to mark the replies as answers if they help and unmark them if they provide no help. Thursday, February 14, AM. Hello, Leon Here are my answers: What is the operating system of your other computers? I am not sure if this workaround is a solution. Best regards Stephen Pen. Proposed as answer by HK. Leon Tuesday, March 5, AM. Thursday, February 14, PM. Leon 0. Friday, February 15, AM. Hi, Enable netmon trace, then start accessing the share and stop the trace.

Try to analyse the traces using netmon. Regards Sajin P S. Best regards, Stephen Pen. Thank you for your reply. Saturday, February 16, PM. Thank you, Cradsa for your message. Anyway, I am really happy this time I was helpful. Monday, February 18, AM. I spent over three hours with Microsoft Tech Support yesterday on the same problem. Passwords are not needed. Credentials are not needed. The "C" drive is not required for sharing. The "Functional Discovery Resource Publication" Service is not working correctly - you must Stop and Restart the service in order for a computer to appear on the network.

Two of the three computers can talk to each other bidirectionally without a problem. The third computer can see and access folders on the other two computers. But this third computer denies access to the other two. Using Stephen's technique, I can now see the folders and files on the third computer. I can't begin to tell you the number of hours I have spent on this along with Microsoft Tech Support. I am convinced there is something wrong with the third computer's setup; perhaps there is a hidden setting that fixes this or something that must be undone and reset.

I have been all over settings, reinstalling NIC drivers, etc. I just can't find it. Thank you Stephen Pen for your efforts!

Tom Carlos. Tuesday, April 9, PM. Update and Success - As notes previously, I was working with three computers, each was a Windows 7 to Windows 10 update. Phew- that was a cumbersome exercise. I hope this helps someone. Monday, April 15, PM. This finally solved my 'You do not have permission to access Tuesday, June 11, PM. Thursday, June 27, PM. Sunday, July 7, PM. Just noticed this in and solved by entering full remote path. Friday, August 2, AM.

Thank you Stephen Pen, this worked for me too as a workaround. I have a new laptop and tried everything. Monday, September 9, AM. I have had the same problem since updating various computers on a network to I'm guessing there are remnants of some previous permissions settings that can't be changed or addressed in It's maddening.

I have spent weeks on this. Edited by dbarrow Wednesday, October 9, AM. Tuesday, October 8, PM. Wednesday, October 9, PM. Same problem here. It seems like someone at Microsoft would be able to easily answer this. I have several computers. Some are visible in "network" some are not. One of them gives the "you don't have permission" warning pop up, but not when the full share name is typed in.

All computers are now and have the same settings. Thursday, October 10, AM. Friday, October 25, AM. Sunday, October 27, AM. Sunday, October 27, PM. The whole gist of this thread is that many people did that and it didn't work. That is why I posted here. Starting over with a fresh Windows installation and doing what you stated cured the problem.

I had all the computers on the network shared with the same "everyone" security group, full permissions etc. I have done it that way for years. This one particular computer wouldn't respond to those suggested fixes, probably because of conflicting parameters left over from previous upgrades and updates. I too worked for hours trying everything mentioned in this thread as well as countless others.

Both systems I am using are So is it a DNS issue? I am not using Active directory as DNS controller. But I have added up Active directory as domain in the DNS settings of my DNS server separate server , so the clients identify the domain as the active.

Hello SanyogBhardwaj , How are things going on your end? Please keep me posted on this issue. If you have any further questions or concerns about this question, please let us know. I appreciate your time and efforts. Actually I tried opening up the same AD profile on other systems and it worked flawlessly. I removed my system from the domain and added it back to test my profile, same issue.

Other profiles works flawlessly on the same system. I could never understand why it was happening so I ended up creating a new profile for me and deleting the old one and transferring SMB share access to the new profile. Its now working as expected. Hello SanyogBhardwaj ,. To better understand your question, please confirm the following information at your convenience. Based on "When we disconnect a system from the network and then reconnect the system to the network", did you mean you unplug the network cable?

Or take the device to a place outside the domain network or disjoin the device from the domain and then re-join the device to domain? Did you mean there will be such issue for all the shared paths or only one shared path when you disconnect a system from the network and then reconnect the system to the network?

Will the Network drives and redirected folders automatically detect the network reconnection and establish communication with Drives and locations after you wait some time? Or no matter how many time you wait, the issue persists? Run Network Monitor as administrator.